TECHNICAL DATA SHEET
PRODUCT NAME
DeFlux-It Flux Remover
PRODUCT RANGE
Part Number Available Size
CT-DF-DP 12ml Pen
CT-DF-300 300g Aerosol
CT-DF-300-DB 300g Aerosol with brush attachment
CT-DF-1L 1 Litre
CT-DF-5L 5 Litres
CT-DF-20L 20 Litres
Refer to SDS for product safety guidelines
DeFlux-It Flux Remover
Chemtools® KleaniumTM DeFlux-it Flux Remover is a slow drying, heavy duty flux remover. This special solvent based flux remover has the staying power to really attack some of the toughest baked on fluxes. It will leave little or no residue, and is non-corrosive and compatible with most plastics.
DeFlux-It Flux Remover exhibits rapid cleaning of a variety of soils such as waxes, oils, and greases.
FEATURES AND BENEFITS:
- Heavy duty
- Pleasant lemon odour
- Slow drying for more effective cleaning
- Non-corrosive
- Low toxicity
- Lead and Lead-free compatible
APPLICATIONS AND USES:
- Lead-free PCBs
- Micro BGA and fine pitch components
- Baked on flux
APPLICATION METHODS:
Apply by spraying onto the area to be cleaned. If the residues are stubborn, brushing may be required, followed by rinsing.
DeFlux-It Flux Remover is available in various sizes for immersion cleaning, or filling pump bottles for use with brushes or foam tipped buds. It may also be used in ultrasonic tanks that are adapted for flammable liquids. Technical Data Sheet: DeFlux-It Flux Remover Page 2
Harmless to most plastics, elastomers, and rubbers, it is recommended to test before use on sensitive plastics and rubbers such as ABS, acrylics, and polycarbonates. Use only in a well-ventilated area.
PROPERTIES:
Flash Point 0°C
Boiling Point 60°C
Appearance Colourless liquid
Odour Mild citrus
Specific Gravity @ 20°C 0.85
Volatiles (%) 100
Aerosol Propellant Carbon dioxide
STORAGE:
Store in a cool, dry place, in tightly closed original containers, at a room temperature of between 5°C to 30°C. Do not place in direct sunlight or near any heat source. Do not return any used material to its original container.
SAFETY:
Do not spray aerosol near eyes or face. Do not spray near a naked flame or any hot surface, and keep away from sources of ignition – no smoking. Keep out of reach of children. Extremely flammable. Protect pressurised dispenser from sunlight and do not expose it to temperatures exceeding 50°C. Do not leave in car interiors.
Do not pierce or burn even after use. Intentional misuse by deliberately concentrating or inhaling contents may be harmful or fatal.
PRECAUTIONS:
This product is capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Safety Data Sheets (SDS) for this and all other products being used are understood by all persons who will work with the material.
WARRANTY:
All products purchased from or supplied by Chemtools® are subject to terms and conditions set out in the contract. Chemtools® warrants only that its products meet the specifications designated as such herein, or in other publications. All other information supplied by Chemtools® is considered accurate, but is furnished upon the express condition. The customer shall make its own assessment to determine the products suitability for a particular purpose. Chemtools® makes no other warranty, either expressed or implied, including those regarding such other information, the data upon which the same is based, or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose; or that the use of such other information or products will not infringe any patent.